Nature takes its toll on the exterior of any home. Royal Trim Board® is the ideal new construction and remodeling solution to battle severe weather and seasonal elements. Made of 100% Cellular Vinyl PVC™, Royal Trim Boards® are an improved alternative to other composite and wood boards. Offering design versatility coupled with unmatched Poly Select® surface durability makes Royal Trim Board® “The Best Board in the Business®”
Available Surface Styles
Features & Benefits of Royal PVC Boards
- Lifetime No Rot®
- Durable PolySelect® Surface
- Reversible (Textured or Smooth)
- Sheet Stock or Trim Boards
- Moisture Proof Material
| - Moisture Proof Material
- Paintable with 100%Acrylic Latex Paint
- Consistent High Density
- Mills & Miters with Standard Tools
- High Energy Efficiency
|
Available Sizes
| 4" | 3/8" x 3-1/2"
| 2880 | 208 | 18' |
| 6" | 3/8" x 5-1/2" | 2881 | 128 | 18' |
| 8" | 3/8" x 7-1/2" | 2882 | 96 | 18' |
| 10" | 3/8" x 9-1/2" | 2883 | 80 | 18' |
| 12" | 3/8" x 11-1/2" | 2884 | 64 | 18' |
| 4" | 1/2" x 3-1/2"
| 2873 | 156 | 18' |
| 6" | 1/2" x 5-1/2" | 2874 | 96 | 18' |
| 8" | 1/2" x 7-1/2" | 2875 | 72 | 18' |
| 10" | 1/2" x 9-1/2" | 2876 | 60 | 18' |
| 12" | 1/2" x 11-1/2" | 2876 | 48 | 18' |
| 4" | 5/8" x 3-1/2"
| 2832 | 130 | 18' |
| 6" | 5/8" x 5-1/2" | 2833 | 80 | 18' |
| 8" | 5/8" x 7-1/2" | 2834 | 60 | 18' |
| 10" | 5/8" x 9-1/2" | 2835 | 50 | 18' |
| 12" | 5/8" x 11-1/2" | 2836 | 40 | 18' |
| 4" | 3/4" x 3-1/2"
| 2826 | 117 | 16', 18 |
| 6" | 3/4" x 5-1/2" | 2827 | 72 | 16', 18 |
| 8" | 3/4" x 7-1/2" | 2828 | 54 | 16', 18 |
| 10" | 3/4" x 9-1/2" | 2829 | 45 | 16', 18 |
| 12" | 3/4" x 11-1/2" | 2830 | 36 | 16', 18 |
| 4" | 1" x 3-1/2"
| 2866 | 91 | 16', 18 |
| 6" | 1" x 5-1/2" | 2867 | 56 | 16', 18 |
| 8" | 1" x 7-1/2" | 2868 | 42 | 16', 18 |
| 10" | 1" x 9-1/2" | 2869 | 35 | 16', 18 |
| 12" | 1" x 11-1/2" | 2870 | 28 | 16', 18 |
Stocked Materials
Cutting
Royal Trim Board® can be cut using the same techniques and tools as are used for wood. Carbide tipped blades are recommended.
Routing
Royal Trim Board® can be routed using standard carbide tipped router bits. While this process works well by cutting away the skin there is a loss of strength in which the material must not used in “structural” (load bearing) applications.
Drilling
Royal Trim Board® can be drilled in the same fashion as most hardwoods. Drill holes may require the removal of shavings periodically. High Speed Steel Bits are satisfactory for this process.
Fastening
Royal Trim Board® can be fastened using stainless steel or galvanized screws or nails as well as pneumatic fasteners. Apply fasteners approximately 1” - 2” from the edge of the board with support structure (joists) spacing no more than 16” center to center. Fine thread and ring shank are not recommended. Typically it is not necessary to pre-drill. However, there may be situations where this may be necessary, particularly in cold temperatures.
Gluing
For best results glue all joints of Royal Trim Board® material with PVC cement. Bond & Fill manufactured by Advanced Trimworks, Inc. may also be used. This will provide a strong bond prohibiting joints fromopening. It is highly recommended to splice (scarf) and/or miter all joints. Butt joints are not recommended.
Painting
Royal Trim Board® may be painted using a 100% acrylic latex paint. Dark colors should be avoided in areas where the material will be exposed to direct sunlight.
Tips
• Typically a paintable exterior high quality acrylic latex caulk is recommended.
• When adhering Royal Trim Board® to wood a construction type adhesive (i.e. Liquid Nails LN-901) may be used.
• Royal Trim Board® should always be stored in a flat level position.
